Seek error See Drive Problems. Join our community for more solutions or to ask questions. To help you troubleshoot a problem, your computer has four lights labeled "1," "2," "3," and "4" on the front or back panel. Memory data line failure at address, read value expecting value Memory double word logic failure at address, read value expecting value Memory odd/even logic failure at address, read value http://applecountry.net/dell-optiplex/dell-optiplex-error-codes-2-4.php
If the computer does not boot, contact Dell for technical assistance (see Contacting Dell). Diagnostic LEDs for the OptiPlex series (2005 to 2009) This series had a combination of Power button LED states and the A, B, C, B, block was replaced with 1, 2, Check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights). Note : Please click on the title of the section you want to open below, in order to see the contents. http://en.community.dell.com/support-forums/desktop/f/3514/t/19355664
Blinking yellow A power supply or system board failure has occurred. Blinking green The computer is in a power-saving mode (Microsoft® Windows® XP). Jack Like 0 You have posted to a forum that requires a moderator to approve posts before they are publicly available.
i think theres an issue with the graphics card no display at all. 0 LVL 23 Overall: Level 23 Components 8 PCs 6 Desktops_PCs 3 Message Expert Comment by:edbedb2009-10-05 I Data error See Drive Problems. i have checked the monitor with another pc all working fine please help. 0 Question by:blackm3 Facebook Twitter LinkedIn Google LVL 91 Active today Best Solution bynobus my troubleshooting procedure would Dell Optiplex 960 Error Codes 3 And 4 No corrective action is required.
Bad command or file name Ensure that you spelled the command correctly, put spaces in the proper place, and used the correct pathname. Dell Optiplex 745 Diagnostic Lights 1 3 4 lilbit13007, Oct 20, 2011 #7 JHM banned Messages: 445 bye Last edited: Dec 16, 2012 JHM, Oct 21, 2011 #8 (You must log in or sign up to reply here.) Click Performance and Maintenance and click System.
If two or more memory modules are installed, remove the modules (see your service manual), then reinstall one module (see your service manual) and restart the computer.
Reinstall the processor and restart the computer. Dell Optiplex Gx620 Error Codes Type 1 to start the Drivers and Utilities CD menu. If it still fails, you may very well have a failed motherboard. Memory address line failure at address, read value expecting value See Lockups and Software Problems.
See Starting the Dell Diagnostics From Your Hard Drive or Starting the Dell Diagnostics From the Drivers and Utilities CD (Optional) for more information. https://www.scribd.com/doc/55908294/Dell-OptiPlex-745-Quick-Reference-Guide always possible 0 Message Author Comment by:blackm32009-10-05 ive tried changing the memory in each slot no luck i got ram from a working pc still no luck :( 0 Dell Optiplex 745 Error 1 3 4 When I looked online at ebay for a new motherboard, I just looked glanced at the description for a motherboard kit. Dell Optiplex 745 Error Codes 1 2 3 Insert bootable media Insert a bootable floppy disk or CD.
If you have one memory module installed, reinstall it and restart the computer. (see Memory for instructions on how to remove and install memory modules.)If you have two or more memory this contact form If customer can assist to troubleshoot, narrow down the issue by removing one by one the component on motherboard to determine which one failed. Custom Test Tests a specific device. Run the Dell Diagnostics to identify a more serious cause (see Dell Diagnostics). Dell Optiplex 755 Error Codes 3 And 4
If customer can assist to troubleshoot, narrow down the issue by removing one by one the memory on motherboard to determine which one failed. The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays the information in the device list in the left pane of I've tested the monitor, which is working. http://applecountry.net/dell-optiplex/dell-optiplex-330-error-codes-1-3.php If identified the storage failed, replace the storage.
If the POST portion of system boot completes successfully, all four lights display solid green. Dell Optiplex Gx280 Error Codes No expansion slots at all. Open your browser and go to crashplan.com: Click get started, it’s free then Click the Download CrashPlan button: Click save in Internet Explorer, the… Windows 8 PCs Storage Software Cloud Computing
If none of the memory failed, replace the motherboard. If the LED still does not illuminate, remove the PSU connections from the system board, then press and hold the power supply button. It is recommended that you print these procedures before you begin. Dell 745 Beep Codes Plug in your computer and reboot it.
Incorrectly configured devices are indicated by a yellow exclamation point (!) or a red X if the device has been disabled. If this does not resolve the problem or if you have an ultra small form-factor computer, contact Dell (see Contacting Dell). Taking forever to open a folder, documents, or any programs that you didn't have an issue with before? http://applecountry.net/dell-optiplex/dell-optiplex-error-codes-3-and-4.php Article by: Seth_zin Computer running slow?
When I press the power button on the tower, the electricity runs and turns something on, including the fans, but the monitor doesn't show anything. Yes, my password is: Forgot your password? The system lights at the back show 3 4 in green which means there might be a issue with the ram, but i replaced it with new ram still no luck If customer can assist to troubleshoot, narrow down the issue by removing one by one the memory on motherboard to determine which one failed.
If it still doesn't boot try some different/new memory of the same speed. OptiPlex audible Beep codes In addition to the various types of diagnostics LEDs, there are a number of audible beep codes across all the models of these systems. These LEDs do not indicate the problem that caused the POST routine to stop. No timer tick interrupt Run the Dell Diagnostics (see Dell Diagnostics).
I opened to case but saw nothing unusual (e.g. This pattern also displays when you enter system setup (see Entering System Setup) and may not indicate a problem. FrenchThe Future InternetSamsung camera ST500(TL220) User ManualDePauw Magazine Summer 2006Designing for digitalTrends in Video Games and GamingSamsung Camera ST66 English User ManualThe Dyslexic Reader 2006 - Issue 41Samsung ES65(SL50) English User Back to Top 4.
No harm intended. If the operating system is attempting to boot from a device (such as the floppy drive or optical drive), check system setup to ensure the boot sequence is correct for the If the computer starts normally, continue to install additional memory modules (one at a time) until you have identified a faulty module or reinstalled all modules without error.