Then Terminal stopped not showing mure of such last line (no other message shown). If I click the Partition tab, I get the spinning color wheel and Option Command esc shows that Disk Utility is not responding. I could not for the life of me get this generic 32gb flash drive to work. Reply ↓ Nuvi November 18, 2014 at 5:10 pm Thanks this worked perfectly! my review here
I formatted the SD card, and cded into the folder containing the Raspbian img file, but when I run sudo dd if=2013-07-26-wheezy-raspbian.img of=/dev/disk2s1 bs=1m, this is the output I get: dd: It took me a while to figure it all out, but this is what I ended up doing: 1. So, LaCie flashing takes 42 MB more than the native Innostor (!). When I tried again, I got: Partition failed Partition failed with the error: Disk object invalid or unable to serialize.
I tried to cat /dev/random and it keeps scrolling and hangs. After about 15 minutes waiting, I unplugged and plugged back the pendrive. As the saying goes, don’t get mad, get even. Of course, with a large hard drive this value equation will be different, and a conscientious effort to salvage the drive may be appropriate.
Answer: A "feature" of recent versions of MacOS "Disk Utility" requires that a source disk-image (.dmg) be "scanned" before it can be restored to a blank disk/partition: A bug in Disk Utility share Share on Twitter Share on Facebook Email Link Like + Quote Reply p1ra73x, Jul 22, 2013 p1ra73x macrumors newbie Joined: Jul 22, 2013 #25 Permissions I just had the same Amazing! Unable To Scan Resource Busy Yosemite Assuming the drive is just experiencing major low-level corruption, the problem you face now is how to format a drive that apparently cannot be formatted on your Mac?
Can't figure out why Apple would redesign Disk Utility to not unmount first. [ Reply to This | # ] Search Advanced From our Sponsor... format it as 'free space' with a GUID partition table physically remove USB plug back in ( hopefully ) it will say 'disk could not be initialized' click IGNORE proceed with Glad no other damage was done. But just one question, how do you come up with such ideas?
Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. Unable To Scan Invalid Argument Disk Utility Could not repair or erase the disk. Reply ↓ MaX April 10, 2014 at 7:57 am Thanks. What does "VirtualHost overlap on port 443" mean?
It keeps a file open on the volume, so it is "busy". http://www.123myit.com/2013/05/how-to-fix-restore-failure-could-not-restore-resource-busy-error/ Drag and Drop disk image (dmg or iso) into Disk Utility 7. Disk Utility Restore Resource Busy I had the destination disk selected at left but properly had my source disk in the "source" field and the destination disk in the "destination" field. Disk Utility Unable To Scan Resource Busy Jefferson Le Blanc June 18, 2016 at 3:21 am @ John D: It may not be possible to determine at this late date, but I'm curious how the drive got corrupted
Meer weergeven Laden... this page On the other hand, ChipEasy_EN_V18.104.22.168 from http://flashboot.ru/files/file/361 says: Logical drive : F:\ Capacity: 14.3G Device ID : VID = 059F PID = 1038 Device SN : XXX Device version : Dev Reply ↓ B. Someone flipped a breaker during a restore session and I almost cried when I got the error that my encryption made my drive useless. Disk Utility Could Not Restore Resource Busy
Top Media 829.486 weergaven 5:13 How to Make a Bootable Mac OS X Mountain Lion 10.8 USB Thumb Drive - Duur: 7:19. This worked for me as well. Trying to created a Hackintosh USB drive. (Please don't sway from topic - important fact is I can no longer create a USB image using Disk Utility) Let me also say get redirected here This is the (relevant) output of $ diskutil list: /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *32.5 GB disk2 1: Windows_FAT_32 YQFORKLIFT 32.5 GB disk2s1 As well as $ df
I had pretty much given up when I came across your post. Restore Failure Could Not Unmount Volume Resource Busy Plug that baby in, then immediately start hitting ‘enter' followed by up-arrow until you start getting "^[[A" instead of errors. Reflection of "Yada yada hi dharmasya..." in Durga Saptashati?
Pay attention to the id of the disk that is being reported as "busy". I close that error msg window and the disc returns to the left hand pane while another msg window comes up with "The disk you inserted was not readable by this Drag and drop (unmounted) USB partition into destination 12. Disk Utility Restore Failure Could Not Validate Source I can't speak for the Windows solution, but if you had bothered to read the other comments on the thread you would have seen that the solution worked for a majority
It should work.Click to expand... I've been trying to make a Hackintosh USB for about a month. If you're getting this error then either your source is selected at left and is currently mounted (unmounting it should work) or you have some other active disk or partition selected http://applecountry.net/disk-utility/disk-utility-partition-failed-with-error-resource-busy.php I ended up copying the dmg file from the external drive onto the internal HD of my laptop and the scan completed successfully...