If you have one memory module installed, reinstall it and restart the computer. (see Memory for instructions on how to remove and install memory modules.)If you have two or more memory If you purchased a Dell™ n Series computer, any references in this document to Microsoft ® Windows ® operating systems are not applicable. ____________________ Information in this document is subject to Inloggen Transcript Statistieken 17.530 weergaven 79 Vind je dit een leuke video? If none of the card failed, replace the motherboard. have a peek at this web-site
Reseat all power and data cables. No boot device available If the floppy drive is your boot device, ensure that a bootable floppy disk is in the drive.If the hard drive is your boot device, I have a dell optiplex 745. Configuration Displays your hardware configuration for the selected device. https://www.manualslib.com/manual/36837/Dell-Optiplex-745c.html?page=25
Please reply so that we could assist you further. Solid green and a beep code during POST A problem was detected while the BIOS was executing. Also, check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights).
Several functions may not work. Diagnostic Indicator Table State State Name Power Light: Amber Blinking Amber Blinking Pattern Problem Description Suggested Resolution - - 2, 1 2 blinks followed by a short pause, 1 blink, long Blinking green The computer is in a power-saving mode (Microsoft® Windows® XP). Dell 745 Beep Codes Air temperature sensor not detected For any computer type except the ultra small form-factor computer, ensure that all cables are securely fastened to the I/O panel and to the system
When the boot device list appears, highlight IDE CD-ROM Device and press
Je kunt deze voorkeur hieronder wijzigen. Dell 745 Drivers If the problem is not identified, contact Dell for technical assistance (see Contacting Dell). If it doesnt, you may have a bad board. If it doesn't contact your technical support If it does add the memory modules back one at a time until the fault re-occurs, test that module in another slot and contact
on power button the orange light is on and off again and again. The diagnostic lights are not lit after the computer successfully boots to the operating system. Dell 745 Error Code 3 4 I have the sore finger tips to prove it. Dell Optiplex 745 Error Codes 1 2 3 Laden...
Click the Change or Remove Program icon. http://applecountry.net/error-code/dell-the-error-code-is-110.php Sincerely, Blake. 7yearComputer Hardware + Software Technician. A possible graphics card failure has occurred. Before my friend and I discovered the bulging capacitors, we tried new RAM, which didn't work. Dell Optiplex 745 Led Error Codes
S6 STO 3, 3 3 blinks followed by a short pause, 3 blinks, long pause, then repeats No Memory detected If customer can assist to troubleshoot, narrow down the issue by A possible system board failure has occurred. Also, combining the configuration to validate appropriate combination. http://applecountry.net/error-code/dell-error-code-150.php Reinstall the CPU and restart the system.
If only one memory module is installed, try moving it to a different DIMM connector and restart the computer. Dell 745 Review Deric LostutterGAO Report Bill and Hillary Clinton Trashed the White HouseChristopher "Moot" Poole Testimony in Palin Email TrialEmployee ManualMemorandum of UnderstandingSV150 doubletruck 042416Employee HandbookWhite PaperThe Radio JournalMicrosoft SpyEquation Group Questions and If identified the storage failed, replace the storage.
Memory modules are detected, but a memory configuration or compatibility error has occurred. I insert my CD in the drive. Operations Technician at a retail company. Dell 745 Memory Rhythm guitarist for the band Headspill.
Option Function Express Test Performs a quick test of devices. If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop. Ensure that the display is connected and powered on. have a peek here Starting the Dell Diagnostics From Your Hard Drive Turn on (or restart) your computer.
Ensure that any power strips being used are plugged into an electrical outlet and are turned on. Back to top Page 1 of 2 1 2 Next Back to Internal Hardware 0 user(s) are reading this topic 0 members, 0 guests, 0 anonymous users Reply to quoted postsClear Hold down several keys at once. Bad error-correction code (ECC) on disk read See Drive Problems.
Instead the Power Button state now gives a blink and colour shift pattern to indicate where its had a problem. OptiPlex 745 Een ander product weergeven Handleidingen Handleidingen Garantie Garantie Systeemconfiguratie Systeemconfiguratie Diagnostiek Supportonderwerpen en -artikelen Drivers en downloads Onderdelen en accessoires Bezig met laden.