If you want to attempt board level repair try the electrolytic capacitor, C702, 10 uF 50 VDC. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. Error 30 PS Error 16 ALL PRINTERS This is an unexpected PostScript firmware error. Is the paper size correct? have a peek at these guys
When the installation is correct, the metal contacts are not visible. I've see it do this even when the config page (printed by pressing both the Go and Job Cancel buttons at the same time while the printer is ready) clearly shows Once depleted, replace the cartridge. If networked, check to ensure the IP settings in the printer and driver haven't changed and match. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02731710
Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers Click OK. It will then pull from the front tray no matter where you told it to print from. Temporary error.DIMM error. 2.
Check these items. per DIMM for the printer. If you are printing from tray 2, 3, or 4, verify that any paper-size adjustments (length guide, width guide, size-selector switch) on the paper tray have been made correctly. Hp Laptop Error Codes On rare occasions a defective paper control assembly or actuator can cause this problem.
Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize.2. Hp Laserjet P3005 Memory HP Error Code:60.xx - Explanation:On new printers this relates to a motorised tray lift error. Error has occurred on some memory. 2. http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=501044&docId=emr_na-c00507233&docLocale=en_US ERROR 50.XXXX - ERROR 51 (Loss of beam detect) This is a beam detect error indicating a problem with the laser scanner.
If the case sticks, shake it and if that doesn't work, try lifting the printer up a little and dislodging the case on the bottom. Hp Computer Error Codes On the right side of the product, open the DIMM access door. 1: Open the DIMM access door Remove the DIMM access door. 2: Remove the DIMM access door To replace Click the Driver tab. Right-click the product driver icon, and then select Properties.
Remove and reinstall the supply, replace the supply. anchor Press GO to clear the error message and continue printing. 2. Hp P3005 Memory Error Replace Dimm Replace memory card 4. Hp Printer Error Code 49 Error 58 4/4L/4P/4V/5/5P Check the fan cable - reseat cable or replace fan 4V/4MV Defective DC controller board - replace IIISi/4Si Error 58.1 & 58.2 Improperly seated paper cassette 4Si/IIISi 58.1/58.2
This error code and HP error codes 52.1 and 52.2 indicate a problem with this process. There are still other HP printer error codes that may come out depending on the printer model you own. What to do:These faults typically needed assistance from an experienced HP engineer. Also check the toner level sensor and the toner cartridge itself for damage. Hp Printer Error Codes List
You can remedy this by replacing the paper guide plate assembly, RG5-2248-030. Hp Printer Error Code List Pdf Los Altos Hills, CA Thank you. What to do:Turn off the printer and remove the printer cable (USB or I/O cable), then turn it back on.
If unresolved, remove all cards/accessories and replace one my one to identify what is at fault. If the error persists: 1. HP LASER PRINTER 2300, 2410, 2420, 2430 ERROR 53.XX.ZZ 1. P3005 Formatter Board If the error persists you may need a new duplex unit.
Memory allocation Utilities or jobs that you download to the product sometimes include resources (for example, fonts, macros, or patterns). Make page less complex and retry. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. Check the I/O connections and make sure the proper media is being used.
Try the dimm in a different slot.6. Replace dimm chip. 4. Bad or dirty cartridge contacts. Faulty MIO problems are very rare.
Click here for the defective parts return procedure for Europe . Fuser drive motor or the pressure release doesn't work 50.8 Lower fuser temperature (sub-thermistor). Was the information on this page helpful? Install memory DIMMs Turn the product off, and then disconnect all power and interface cables.
Replace if necessary. ERROR 59 Add Memory 4Si/IIISi Not enough memory for PostScript option. Replace main motor. Listen for the motor operation, make sure it's operational.
Wayne Haub Kansas City Help with HP printer problems and error codes. X Description 2 Fan 3 - Formatter Fan (intake) 3 Fan 2 - Laser/scanner (exhaust) 5 Fan 1 -Low-voltage power supply (exhaust) 6 Fan 4 - Face-down delivery (exhaust) 9 Fan HP Error Code:65 - Scan Buffer Error Explanation:Depending up your model this can be a number of different things including: defective D.C. LJ 4250/4300/4350 A printer fan is not funtioning.
What to do:Check the SIMMs or cartridge to ensure they are intended for your machine. Improperly seated SIMMs or font cartridge - remove, check/clean contacts re-install and try again. SIMM malfunction. 2. Reseat all the memory on the mother board.4.
Back back to top How did we do? When handling electronic parts, either wear an antistatic wrist strap, or frequently touch the surface of the antistatic package and then touch bare metal on the product. 3: Remove the DIMM